Is rich in wood fiber that can be used to create various rich and exquisite appearances while allowing you to enjoy forest bath in Mother Nature at any time of the day, helping you to build an environment-friendly house with a healthy system.
Main ingredients:
Selected diatomite, inorganic silicate, nano polymer materials and nano photocatalyst in the Asia Pacific Region
Theoretical consumables: pure pulp mud: 1-1.5KG/m2/2 times
Recoating time (at 25 degrees C):Dry: 2 hours dry: 48 hours repainting: 4 hours later
Water injection:
First, 9 of the water is injected and the main material is opened. Stirring for about 3-5 minutes, add nano polymer material and continue beating. After about 3-5 minutes, make sure that the mixture is uniform and add the last 10% water and continue stirring. Man Tu suggested: according to different processes, increase or decrease the amount of water to adjust the dilute consistency.
Construction methods:
A (plain batch texture class): matching ratio: man coated mud: purified water =1:0.55
1. use batch knife thin batch first, dry slightly milled after leveling.
2. flat batch second times, before the material is dry, the surface of man should be polished.
Texture class construction (e.g. scraping, loose): use special tools to make special textures.
B (spray type): proportioning: man coated mud: purified water =1:0.6
1. The first time with a batches of a batches, the thickness of 2mm.
2. Adjust the distance between the spray gun and spray the spray gun evenly after drying. After drying, it can be selectively pressed and polished.
C (roll coating): ratio: man coated mud: purified water =1:0.8After the putty bottom is treated with water, the log mud is evenly opened, and the roller is painted evenly over two times. The dark roller is coated with three times, and do not polish the last time.
Preservation: Store in a dry and ventilated place at 20-35 C. Keep the remaining materials in a sealed manner.
Shelf life: 12 months
Matters needing attention:
1. the temperature is less than 5 degrees, and the relative humidity is greater than 85%.
2. the construction must be dry at that time, that is, polished. When the wall is polished, a dust respirator should be put on.
3. Open all doors and windows to ensure adequate ventilation in the construction area.
4. read the construction instructions before use to obtain a reliable and satisfactory coating effect.
