Main ingredients: pure water, pure taste emulsion, inorganic silicate, pearl powder, cellulose

Coating area: Chatsworth (dot coating): special primer for this product: 6.5m²/L/2 times; main material 13-19.5m²/L/1 times

Recoating time (at 25 ° C): surface dry: 2 hours Hard dry: 48 hours Recoating: 4 hours later

Preparation tools: natural seaweed balls, wool rollers, scrapers

Construction method:

1. Roll the "Chatsworth" special primer twice, the color can be even.

2. Dip a small amount of “Main Material A” on the opposite side of the seaweed ball to irregularly print. Wait until the surface is dry with a scraper.

3. Repeat the above steps with a small amount of “Main Material B”.

4. When the effect is unnatural, the “Chatsworth” primer can be printed with seaweed balls for better results.

5. It can be completed within 24 hours after drying.

Storage: Store in a dry and ventilated place at 20-35 °C. Keep the remaining materials sealed.

Shelf life: 12 months

Note (Please pay attention to the following 4 points):

1. Temperature ≤ 5 °C, relative humidity ≥ 85% can not be applied.

2. It must be sanded when it is dry, and dustproof masks should be worn when grinding the wall surface.

3. Read the construction instructions before use to obtain a reliable and satisfactory coating effect.

4. For details, or any construction issues, please contact Mantu.