Main ingredients: pure water, nano calcium carbonate powder, talcum powder, silicone emulsion

Coating area: Gretna (flat batch): 0.63-0.75m²/L

Recoating time (at 25 ° C): surface dry: 2 hours Hard dry: 48 hours Recoating: 4 hours later

Construction tools: wool roller, batch knife, blade, "Gretna" special batch knife

Construction method:

1. Apply anti-alkali primer (requires brushing to completely block the base layer to prevent the underlying alkali medium from penetrating).

2. Flatten the "Gretna" main material once again (requires a flat bottom).

3. After drying, grind and dust with 320-600 mesh sandpaper.

4. Use the "Gretna" special batch knife, batch 2-3 times of the main material, flattening and polishing.

5. The effect of high light, that is, the high-gloss wax on the surface.

Storage: Store in a dry and ventilated place at 20-35 °C. Keep the remaining materials sealed.

Shelf life: 12 months

Note (Please pay attention to the following 4 points):

1. Temperature ≤ 5 °C, relative humidity ≥ 85% can not be applied.

2. It must be sanded when it is dry, and dustproof masks should be worn when grinding the wall surface.

3. Read the construction instructions before use to obtain a reliable and satisfactory coating effect.

4. For details, or any construction issues, please contact Mantu.